3d roll cage/chassis designs used in the Drift Studebaker and other projects:
In order to view these files you will need the Bend Tech Software, and in order to view most of my designs you will need the Pro version. visit their website for more info: www.bench-tech.com
|
This is the latest version of the cage/chassis design for the Studebaker Drift Truck. Designed in Bend Tech Pro. it also includes some imbedded brackets for the rear suspension and front steering rack mount. Brackets are also available individually on the bracket library page.
|
| ||
|
This is a cage that was digitally designed off on an existing cage for a 1929 for model A salt flat racer. The owner needed to modify the tubes surrounding the drivers body and helmet in order to pass tech. the design was modified from the original measurements to accommodate the needed changes.
|
| ||
|
This is the front sub frame assembly from the drift Studebaker. it is designed to make the arms parallel to each other based on the S-10 spindle used in my design. I used off the shelf brackets for the upper a arm mounts which is why it does not have any in this design.
|
| ||
|
This is the front A-arm design for the Drift Stude. it is built to used threaded tube ends and a spherical bearing in place of a ball joint.
|
| ||
